Produkte / Products

A028/2023

McLaren MP4/5
Brake Set for Fujimi (09193 / 09057 / 09062 / 09071 / 09066 / 09093)

Scale 1/20
Brake Set designed for Fujimi McLaren MP4/5 model kit. The calipers are more detailed than the original parts, have bleed nipples and an attached brake line. The brake discs are replaceable with small adjustments. An open wheels presentation is also possible using the wheel nuts / center nuts.

A029/2023

Lotus 99T
Brake Set for Tamiya (20020 / 20057)

Scale 1/20
Brake Set designed for Tamiya Lotus 99T model kit. The calipers are more detailed than the original parts, have bleed nipples and an attached brake line. The brake discs are replaceable without adjustments. An open wheels presentation is also possible using the wheel nuts / center nuts.

A030/2023

Ferrari F189 (640)
Brake Set for Tamiya (20023 / 20024)

Scale 1/20
Brake Set designed for Tamiya Ferrari F189 (640) model kit. The calipers are more detailed than the original parts, have bleed nipples and an attached brake line. The brake discs are replaceable without adjustments. An open wheels presentation is also possible using the wheel nuts / center nuts.

A032/2023

McLaren MP4/4
Brake Set for Tamiya (20022 / 89719 / 92208)

Scale 1/20
Brake Set designed for Tamiya McLaren MP4/4 model kit. The calipers are more detailed than the original parts, have bleed nipples and an attached brake line. The brake discs are replaceable without adjustments. An open wheels presentation is also possible using the wheel nuts / center nuts.

A033/2023

Harness Set A
Seat Belt Buckles and Adjusters - 5-Point Racing Harness Set

Scale 1/20
Harness Set with different Buckles and Adjuster types to create a full 5-Point Racing Harness Set. In total  23 pieces.

A034/2023

Harness Set B
Seat Belt Buckles and Adjusters - 5-Point Racing Harness Set

Scale 1/20
Harness Set with different Buckles and Adjuster types to create a full 5-Point Racing Harness Set. In total  23 pieces.

A037/2023

Harness Set E
Seat Belt Buckles and Adjusters - 6-Point Racing Harness Set

Scale 1/20
Harness Set with different Buckles and Adjuster types to create a full modern 6-Point Racing Harness Set. In total  16 pieces.

A040/2023

Driver Nigel Mansell
Williams FW14(B) - 1991/1992

Scale 1/20
F1 driver of the late 80's or early 90's with a helmet in his hands (based on Nigel Mansell's pose). Figure is designed for several kits of the Williams FW14 and FW14B but can also be used for other models.

A041/2023

Driver Grahmam Hill
60s

Scale 1/20
F1 driver of the 60's with both hands in his pockets (based on Graham Hill's pose at the 1962 Monaco GP or 1963 British GP). Figure is designed for several kits BRM or Lotus of the 60's.

A042/2024

Driver Satoru Nakajima
Late 80's or Early 90's

Scale 1/20
Japanese F1 driver of the late 80's or early 90's with helmet (based on Satoru Nakajima's pose). Figure is designed for several kits of Lotus and Tyrrell but can also be used for other models.

A047/2024

Benetton B192
Symmetric Rain Tires

Scale 1/20
Parts are made for the Tamiya Benetton B192 kit 20036 or other 1991/1992 F1 cars.

A048/2024

Ferrari F189 (640)
Asymmetric Rain Tires

Scale 1/20
Parts are made for the Tamiya Ferrari F189 kit 20023/20024 or other 1985-1991 F1 cars.

F1 2005-2010
Bridgestone Rain Tires

Scale 1/20
Bridgestone rain tire set for F1 cars 2005-2010.

A050/2024

Williams FW14
Wheel Set for Tamiya / Fuji Tires (1981-1992)

Scale 1/20
Wheel set for Williams FW14. For conversion Williams FW14B.

A051/2024

Ferrari F300
Replacement Tire Set for Studio27

Scale 1/20
Tire set to replace the tires from the original kits (release date 2006) where the rear tires are too wide.

A052/2024

Tyrrell P34
Holed Seat for Tamiya (20001/20058)

Scale 1/20
Replacement seat for the Tyrrell P34 Six Wheeler kit (Tamiya 20001/20058). Features the multiple holes that were used in some races in 1976, plus four of the holes for the seatbelts, absent in the original kit's part.

A056/2024

F1 1985-1992
Tamiya Goodyear Tires

Scale 1/20
Tire Stencil Set for Front and Rear Tires for Tamiya Tires 1985-1992. For easy and precise painting of the "Good Year" tire markings, 2 precisely fitting stencils.

Set designed for these kits:
- Tamiya Williams FW11 Honda F-1 (20019)
- Tamiya Lotus 99T Honda (20020)
- Tamiya Benetton B188 Ford (20021)
- Tamyia McLaren Honda MP4/4 (20022)
- Tamiya Ferrari F189 (20023/24)
- Tamiya Williams FW13B Renault (20025)
- Tamiya McLaren MP4/5B Honda (20026)
- Tamiya Leyton House CG901B (20028)
- Tamiya Braun Tyrrell Honda 020 (20029)
- Tamiya Lotus 102B (20030)
- Tamiya Jordan 191 (20032)
- Tamiya Lotus 102D Ford (20033/34)
- Tamiya McLaren MP4/7 Honda (20035)
- Tamiya Benetton Ford B192 (20036)
- Tamiya Lotus 107 (20037)

A057/2024

F1 1993-1997
Tamiya Goodyear Tires

Scale 1/20
Tire Stencil Set for Front and Rear Tires for Tamiya Tires 1993-1997. For easy and precise painting of the "Good Year" tire markings, 2 precisely fitting stencils.

Set designed for these kits:
- Tamiya Lotus 107B (20038)
- Tamiya McLaren MP4/8 (20039)
- Tamiya Tyrrell Yamaha 023 (20042)
- Tamiya Ferrari F310B (20045)

A058/2024

F1 1976-1978
Tamiya Goodyear Tires

Scale 1/20
Tire Stencil Set for Front and Rear Tires for Tamiya Tires 1981-1984. For easy and precise painting of the "Good Year" tire markings, 2 precisely fitting stencils.

Set designed for these kits:
- Tamiya McLaren M23 Ford (20002)
- Tamiya Lotus 78 / J.P.S.Mk.III (20004)
- Tamiya Wolf WR1 Ford F1 (20006)
- Tamiya Brabham BT46 Alfa Romeo (20007)

A059/2024

F1 1979-1984
Tamiya Goodyear Tires

Scale 1/20
Tire Stencil Set for Front and Rear Tires for Tamiya Tires 1981-1984. For easy and precise painting of the "Good Year" tire markings, 2 precisely fitting stencils.

Set designed for these kits:
- Tamiya Ligier JS11 Ford F-1 (20012)
- Tamiya Williams FW-07 (20014)
- Tamiya Brabham BT50 BMW Turbo (20017)

A060/2024

Red Bull RB16B (2021)
Pirelli Intermediate Rain Tires

Scale 1/20
Parts are made for the RB16B Alpha Model kit AM03-0005. The tires have additional sidewall markings and an adjusted more real tire tread. In addition, it is not necessary to rework the sometimes very unsightly sprue markings on the rubber tires from the kit.

A061/2024

Lotus 63 (1969)
Wheel and Rim Set

Scale 1/20
Wheel and Rim Set of the Lotus 63. Parts are made for the Paul Munby kit. The tires have an adjusted more real tire tread. Also in the kit - 4 new designed center nuts and 4 separate air valve.

A062/2024

Williams FW11 (1986)
Brake Set for Tamiya (20019)

Scale 1/20
Brake Set designed for Tamiya Williams FW11 model kit. The calipers are more detailed than the original parts, have bleed nipples and an attached brake line. The brake discs are replaceable without adjustments. An open wheels presentation is also possible using the wheel nuts / center nuts.

A063/2024

Williams FW11B (1987)
Brake Set for AMC (AMC-0055) or Tamiya (20019) conversions

Scale 1/20
Brake Set designed for AMC or Tamiya conversions of Williams FW11 model kit. The calipers are more detailed than the original parts, have bleed nipples and an attached brake line. The brake discs are replaceable without adjustments. An open wheels presentation is also possible using the wheel nuts / center nuts.

A064/2024

Williams FW11 (1986)
Front Suspension Jig

Scale 1/20
Part is made for the Tamiya Williams FW11 kit to connect the front suspension arms. By using this jig it is possible to glue, fill and sand parts B32 and B33 to the car body before the suspension assembly.

A065/2024

Lotus 63 (1963)
Suspension Set

Scale 1/20
Suspensions set for the Paul Munby Lotus 63 kit. The set includes 63 parts for a detailed modeling of the front and rear suspensions. Parts were designed for easy assembly and painting. Installation is possible without major adjustments to the kit.

A066/2024

Lotus 63 (1963)
Engine and Exhaust Set

Scale 1/20
Wheel and Rim Set of the Lotus 63. Parts are made for the Paul Munby kit. The tires have an adjusted more real tire tread. Also in the kit - 4 new designed center nuts and 4 separate air valve.

A068/2024

Lotus 63 (1963)
Rear Wing Set

Scale 1/20
Rear Wing Set of the Lotus 63. Parts are made for the Paul Munby kit. The set consists of 2 different versions to recreate the various GP variants. Detailed rear wing mounts. Since the base kit mounts are used, only a few adjustments to the engine cover are necessary.

A070/2024

Electric Connectors Set A
Straight Type

Scale 1/20
Electric Connectors Set consisting of 4 different electrical connectors from straight type. 4 sizes (diameter of the connection wire) for different applications and connections to the various control units.

A071/2024

Electric Connectors Set B
Bent Type

Scale 1/20
Electric Connectors Set consisting of 4 different electrical connectors from straight type. 4 sizes (diameter of the connection wire) for different applications and connections to the various control units.

A072/2024

Electric Connectors Set C
Straight Type

Scale 1/20 - 1/12
Electric Connectors Set consisting of 2 different electrical connectors from straight type. 2 sizes (diameter of the connection wire) for different applications and connections to the various control units.

A074/2024

Electric Connectors Set E
Bent Type

Scale 1/20 - 1/12
Electric Connectors Set consisting of 2 different electrical connectors from straight type. 2 sizes (diameter of the connection wire) for different applications and connections to the various control units.

A076/2024

Benetton B188 (1988)
Brake Set for Tamiya (20021)

Scale 1/20
Brake Set designed for Tamiya Benetton B188 model kit. There are 2 caliper version for the different race versions and more detailed than the original parts, have bleed nipples and an attached brake line. The brake discs are replaceable without adjustments. An open wheels presentation is also possible using the wheel nuts / center nuts.

A077/2024

Benetton B188 (1988)
Front Suspension Jig for Tamiya (20021)

Scale 1/20
Part is made for the Tamiya Benetton B188 kit to connect the front suspension arms. By using this jig it is possible to install parts B3 and B4 and glue, fill and sand parts on the car body B25 before the suspension assembly.

A078/2024

F1 2011-2016
Pirelli Intermediates Rain Tires

Scale 1/20
 The tires have additional sidewall markings and are modeled as closely as possible on the real tire tread. The tires are not designed for a specific model. It may be necessary to adapt the rims to the corresponding model.

A079/2024

F1 2011-2013
Pirelli Full Wet Rain Tires

Scale 1/20
 The tires have additional sidewall markings and are modeled as closely as possible on the real tire tread. The tires are not designed for a specific model. It may be necessary to adapt the rims to the corresponding model.

A080/2024

F1 2014-2016
Pirelli Full Wet Rain Tires

Scale 1/20
 The tires have additional sidewall markings and are modeled as closely as possible on the real tire tread. The tires are not designed for a specific model. It may be necessary to adapt the rims to the corresponding model.

Check the gallery for more pictures.

A081/2024

F1 2011-2016
Pirelli Slick Tires

Scale 1/20
 The tires have additional sidewall markings and are modeled as closely as possible on the real tire tread. The tires are not designed for a specific model. It may be necessary to adapt the rims to the corresponding model.

A082/2024

F1 2005-2009
Bridgestone Intermediates Rain Tires

Scale 1/20
The tires have additional sidewall markings and are modeled as closely as possible on the real tire tread. The tires are not designed for a specific model. It may be necessary to adapt the rims to the corresponding model.

A084/2024

F1 1993-1996
Goodyear Rain Tires

Scale 1/20
The tire set is modeled as closely as possible on the real tire tread. The tires are not designed for a specific model. However, the set is mainly intended for the Tamiya McLaren MP4/8 kit. It may be necessary to adapt the rims to the corresponding model. With this set it's possible to duplicate Ayrton Sennas car driven during his "Lap of the Gods" at Donington in 1993.

This tread pattern was also used into 1996.

A085/2024

F1 2005-2009
Bridgestone Full Wet Rain Tires

Scale 1/20
The tires have additional sidewall markings and are modeled as closely as possible on the real tire tread. The tires are not designed for a specific model. It may be necessary to adapt the rims to the corresponding model.

A086/2024

Benetton B188 (1988)
Detail-up Set for Tamiya (20021)

Scale 1/20
Detail-up Set for the Tamiya Benetton B188 model kit. With this set it's possible to detail the engine area much better than the base kit. In addition to new parts, elements can also be replaced and further refined. The set contains additional parts for the tank and the engine, piping of the radiators and the covers for the rear suspension.

A087/2024

Rial ARC1 (1988)
Roll Bar Detail Set for Finisher's Garage unlimited Trans Kit

Scale 1/20
Roll bar detail set for the Finisher's Garage unlimited Trans Kit (Tamiya Benetton B188) model kit. The set replaces the Roll bar PE part from the Trans Kit and adds the missing upper cover element of the chassis. It also contains a more realistic roll bar element. The cover is hollowed out so that the elements for the tank and the battery included in the set can also be installed.

A088/2024

Ferrari F189 (640)
Front Suspension Jig for Tamiya (20023/20024)

Scale 1/20
Part is made for the Tamiya Ferrari F189 (640) kit to connect the front suspension arms. By using this jig it is possible to glue parts B13/B14 and B18/B19 together, fill and sand it. After this you can add both elements to the jig and mount it on the body part, before the suspension assembly.